DISCUSSION

2.199742 controller never released inhibit bit(s)

3 people are following

hello,

I wouldn't want to disturb,

but here is my case

I used Raspberry pi 4B with EEPROM update to 2022.

i keep getting this message and nothing happens

2.199742 controller never released inhibit bit(s)

I unplugged each usb one after the other, but still the same message:

 

2.199742 controller never released inhibit bit(s)

I use rpi imager to install mobros 

on a usb key and Bout with it, but nothing to do

he stay blocked.

while all the other os  work.

 

Replies 1 - 2 (2)

Hi @sebastien67530 

do I get that correctly that you're flashing the image onto a USB flash drive and are trying to boot from there?

because I've never tested this use case at all.
all the installations we've done so far are booting from a micro sd card

so this might just not work at the moment
is there any particular reason you want to boot from a flash drive instead of a sd card?

You have to modify /etc/fstab and /boot/cmdline.txt and modify the devices listed.  It is set to using the sdcard hardware instead of USB.  My device I changed mmcblk0p1 to sda1.  Do the same for the rest.

Login to comment

Login
Like most websites, we also use cookies. But don't worry, we only use them for your login and statistics.