Raspberry Pi Image

Hi I have installed the raspberry pi image on a raspberry pi 3B+ with a 5 in screen. I keep getting undervoltage errors so the app crashes once the computer ...

Hello ModBros / Community  first of all thanks to the Bros for providing this awesome Project!I first found out about the MoBro Application late 2019 whe i was building ...

Hi there   First of all amazing concept congratulations on all the work.I'm new to PI world and I would like to access the terminal how can I access it ...

I'd like to suggest a ‘type’ of theme that is not currently possible (as far as i can tell).I'd like to be able to display my computer data on ...

Hi Guys  after i flash the new V12 on my SD Card (new 16GB also testet with some others!) and configurate the Setup (No Changes in the new added ...

Followed every step. when i plug it in after everything i get this. I also reformatted my SD and flashed twice. 

Hi there For those in the realms of the Apple that would like Mobro to have a someway similar (but not quite the same) performance monitor on your Mac ...

Hi there!Just wanted to thank you for your wonderful job creating mobro! What an amazing addition it was to my Dual Boot Hackintosh Setup.I've been messing around with the ...

Hello I use my Raspberry for two things ModBros via image installed on a MicroSD card and for SimHub via the Raspbian browser. I would like to know if ...

Hey guys  I bought a screen that has a resolution of 1920x480. It seems like I have everything properly set in the config file. (will add screenshots below) But ...

 it works fine otherwise. i put the modbros stuff on the micro sd should i repeat my steps from the start?

Hello there i have ran previous versions of this application on my raspberry pi3 with no issues.fast forward and i tried installing v12 and it stays stuck on the ...

Just got my MPI4008 4inch screen for few days. http://www.lcdwiki.com/4inch_HDMI_Display-CEverything work fine until installing the drive after install the drive contex connect the display and raspberry pi 3b+ with ...

So this is the first time I have tried anything with a Raspberry Pi (4B) - I have a WaveShare 7.9 inch screen attached (resolution is  400x1289).Ive loaded followed ...

Hi is it possible to launch the terminal on the pi after booting it with the mobros img so I can enable VNC viewer for a headless video output? 

Question…I have a 3.5 inch TFT monitor for the PI. direct connect thru GPIO. Made by Inland or Microcenter's brand. Can I get that to work? It lights up ...

I am lost how to configure the display resolution. I have a 7" 1024x600 display. From what i understand in the manuals i should add something like:#group and mode here ...

by pcvdbroek 1 month 2 replies 0

Same as title. Last version connects via ethernet no issue.

Hey guys   I've been trying to set up a 5 inch screen along with a rasberry pi 3 b to run Mobro. After failing and failing i dived a ...

I'm trying to get this to work for a 3.5" screen I bought from Amazon. Looking at the instructions in the manual I saw that it mentioned MHS35-show which ...

Hi there!When I start up on my non windows mode I would like for the mobro on the pi not to take so much time between the “not found” ...

I tried to use a usb adapter on my raspberry zero withou wifi. But keeps restarting.

I am trying to shift towards the single usb cable solution for my modbro setup but I am having issue to shutdown or reboot the rpi zero (w). Previously ...

Is the changelog available anywhere?  What's different?

I have my Pi plugged into a little screen through HDMI but it is displaying the wrong resolution causing it to look stretched. I don't know how to fix ...

I am a novice and have never done anything with a Raspberry Pi or Linux before.  I bought a Raspberry Pi 3 A+ and an Adafruit PiTFT Plus 2.8” ...

How can I make the LCD monitor/Pi to shut down whenever I turn off/Shut down my CPU?  They would turn on also when I open my CPU I assume? ...

I'm trying to figure out a way to turn the HDMI screen off at set times the reason is my screen is still pretty bright even through the tinted ...

Hi All Do you think it would be possible in the future to set the screen saver to show an iframe? I'd love to be able to show FlightRadar24 ...

I designed and programmed my own custom Splash Animation to play on my RPi. However when I loaded the ModBros program it over written my custom settings.Is there a ...