Raspberry Pi Image

hey id like to start by thanking you for your work on this project <3 I have ran into an issue on set up. my pi gets stuck in booting ...

Hey  I've installed the os and gone through the web Config page and setup the os  I've selected my wifi network for the pi to connect to set the ...

Seems once i run through the Wizard on the hotspot and reboots everything is back to original and did not save my data. Any ideas?

Just set up my raspberry pi zero w all went well but not able to connect to the modbro app on my pc.  Trying to connect to the app ...

Hello guys I just wanted to know how you guys are shutting down your Raspberry Pi's when you shut off the PC?I want to power the PI with a ...

hey guys so i have just installed the app and program and software on the pc and the sd card i flashed successfullywen i plug everything in i get stuck ...

I have wiped and re flash my SD card 4 times so far.  i have attempted to setup through the hotspot every time and get through and it still ...

Hello can have some ideas on how to fix the issue of thee pi not being able to find the PC that has the desktop app. The pi is ...

Hi I just bought a new Raspberry Pi 3 Model B+ along with a 3.5 inch display screen. After I flash the SD card I plug it into the ...

successful pass setup wizard and also install drivers for LCD with no problems.however it's freeze at “ The PHP CGI Process Manager ” during booting and i can't do ...

I am running a Pi2. I have bought a 7"inch non touch screen 1920x1080. It has several inputs like HDMI.I have connected by HDMIBut I can't get modbros scaled ...

I didn't enable the screen saver at first set up. I want to enable it now. I've changed the display_screensaver=disabled to display_screensaver=enabled in the default config but it still ...

I recently move to a new apartment and with it comes a new wifi/network setup. I bought a nice dual-band netgear smart router however i think this may be ...

I've noticed that it will pick one of the gpu's when it comes up and would like to see both on the dash on the PI

Hello everyone today i got my first Raspbarry Pi 3 B+ with the MPI3508 HDMI display. Unfortunately I ordered the wrong charger and so I used an old smartphone ...

Hi guysGreat project been looking for something like this for ages good work!Hopefully someone has seen something similar web interface will not let me populate and wifi fields (ssid ...

Hi guys does anyone have any idea how to force refresh the display or framebuffer I am using an Adafruit 2.8 capacitive tft rebooting the PI does not clear ...

Specs:Raspberry Pi 4 Model BCLB7INH Display I have followed all the steps in the installation guide and my display is just blank. I have tried changing which HDMI port it ...

Good afternoonFor most of us the raspberry pi will be powered on constantly if its plugged directly into a wall socket. I have thought of an idea to save ...

Hey guys. Recently I got set up on a raspberry pi 4 running the v10 img and I'm having problems with output to my display. The desktop app sees ...

Like the title says. I have a wireless dongle plugged in that I already know works with plug-and-play. It's just not connecting. It'll display the correct screen for a ...

Hello community I was hesitate to post in Pi section or in themes as it is clearly linked.On my Raspberry PI3 with Kuman 7 inch screen donuts are “ovals” ...

So i have the Following Setup:Rasp Pi3 A+ Via Ribbon Cable to Rasp 7" Screen W/Case\Once installed into the Case it Orientates the Screen 180 Degrees. Wanting to know how ...

Is there a way to flip the pi‘s display vertically? 

Hello did anybody try rotating the screen of an hdmi screen on a raspi4?  Made it work on a 3.5 gpio connection but cant seem to do it on ...

I have enabled the inbound and outbound rules on my firewall and the raspberry pi is unable to connect to my pc on the same network that is running ...

I'm currently using this display via hdmi: https://www.amazon.co.uk/Elecrow-Capacitive-Interface-Supports-Raspberry/dp/B07PQQGP7R/ref=pd_ybh_a_8?_encoding=UTF8&psc=1&refRID=0GZWDCZH2Y4EXA079JSJMy whole setup is running on a raspberry pi 3 B+Thanks in advance.

First off excellent app works really well and is going to look ace when the screen is installed into the power supply cut out of my case :DGot a ...

Hello  Everything was working great on my raspberry pi. Was monitoring my parameters and looked great.. I connected it to the desktop app with my mobile phone. Just followed ...

Het guys. I'm having some troubles with My Joy-IT 3 5" touch display connected via GPIO.It works as intended with Joy-IT's own raspian image bot not when configuring it ...